Pleated Style

    LiquiPleatTM A Series (JMPA) Cotton Filter Elements

    LiquiPleat A Series cotton filters are used in specialized applications, such as gas sweetening procedures that require removal of organic and inorganic solids from amine systems. Our LiquiPleat A Series filters provides increase efficiency and surface area over traditional cotton string wound filter technologies while maintaining the temperature and compatibility characteristics of cotton media.

    LiquiPleatTM E Series (JPME) Polyester Synthetic Filter Elements

    LiquiPleat E Series polyester filters are pleated "outside-to-inside" flow direction elements designed for applications with large flow and contaminant requirements. LiquiPleat E Series filters are available in various grades and configurations of high performance polyester and hardware to suit your application.  

    LiquiPleatTM P Series (JPMP) Polypropylene Synthetic Filter Elements

    LiquiPleat P Series polypropylene filters are pleated liquid filtration elements designed for applications with large flow and contaminant requirements. LiquiPleat P Series synthetic filters are available in various grades of and configurations of high performance polypropylene with hardware to suit your application. 

    LiquiPleatTM C Series (JPMC) Resin Bonded Cellulose Filter Elements

    LiquiPleat C Series resin bonded cellulose filters are an economical choice for applications such as glycol filtration and lubricating oil where nominal filtration is desired. This entry level offering provides increased surface area, allowing for maximum dirt holding capacity and initial pressure drop. 

    LiquiPleatTM K Series (JPMK) PolycellTM Media Filter Elements

    LiquiPleat K media hybrid filter elements are designed using our proprietary K media blend consisting of bonded polyester and cellulose fibers. This special blend of media provides some of the structural and compatibility advantages of tier one polyester liquid filter elements at a cost closer to that of an economy level cellulose filter. 

    LiquiPleatTM SS Series (JPSS) Metallic Filter Elements

    Pleated metal liquid filters are the ultimate in durability and chemical compatibility. These elements can be used in ultra-high temperature applications and are often backwashed and re-used multiple times before discarding. 

    LiquiPleatTM SE Series (JSE) Sewn-End Filter Elements

    LiquiPleat SE Series filters are designed to replace any manufacturer's elements of this design in particle removal from a liquid stream. To suit any application, a wide range of media is available including: cotton, rayon, polyester, polypropylene, nylon, Teflon®, Nomex®, and fiberglass. 

    LiquiPleatTM ME Series (JME)  Molded-End Filter Elements 

    LiquiPleat ME Series filter elements are molded from highly quality plastisol that seals the ends of the elements while acting as a gasket against the sealing plates in the filter housing. A wide selection of media is available, including: cotton, rayon, polyester, polypropylene, nylon, Teflon®, Nomex®, and fiberglass. 

    LiquiPleatTM H Series (JH) Hydraulic Filter Elements

    LiquiPleat H Series hydraulic filters are heavy duty; high collapse pressure elements designed for use in hydraulic service and are inert to most aromatic compounds. Available in various grades and configurations of high performance media with hardware to suit your specific application. 

    LiquiPleatTM HF Series (JHF) High Flow Filter Elements

    LiquiPleat HF Series elements are large diameter, high efficiency, inside-to-outside flow liquid filters designed for applications with large flow requirements. Available in various grades of absolute rated, high performance micro-fiberglass, polyester, and polypropylene media with hardware to suit your specific application. The large surface area pleated media cartridges are designed to provide the optimum combination of particle removal efficiency and contaminant holding capacity. 

    LiquiPleatTM HF XTR Series (JHFO) High Flow Filter Elements

    LiquiPleat HF XTR Series filters are large diameter elements designed for ultra-high flow applications. These high efficiency elements are designed with a double O-ring sealing system for high liquid flow "in-to-out" and "out-to-in" direction requirements. Available in various grades of absolute rated high performance micro-fiberglass, polyester, and polypropylene media to suit your specific application.

    LiquiPleatTM 3862 Series (JPMP) Polypropylene Filter Elements

    The Jonell LiquiPleatTM 3862 Series elements are large particulate holding, highly efficient, liquid filtration elements specifically designed for applications with high amounts of solid contaminants. They are available in various grades of absolute rated high performance polypropylene media. These large diameter, ultra high surface area pleated cartridges are designed to provide the optimum combination of particle removal efficiency and contaminant holding capability.
     
    The LiquiPleatTM 3862 Series is a pleated style technology supported with nylon or thermally bonded polypropylene end caps. Various options in outer cartridge encasements are also available to protect the pleat integrity assuring even flow and contaminant distribution across the effective surface area of the filter cartridge.